3 PHASE 4 WIRE ELECTRONIC DIN RAIL ACTIVE ENERGY METER ( KWH METER,KILOWATT HOUR METER,ELECTIC METER,WATT HOUR METER)

Detailed Product Description

 DEM021DF

THREE PHASE FOUR WIRE ELECTRONIC DIN-RAIL ACTIVE ENERGY METER

Application

Model DEM021DF three phase four wire electronic DIN rail active energy meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. It can display total energy consumption by step motor type impulse register. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc. This meter has already got the patent certificate from China State Intellectual Property Office at present. Patent certificate NO. ZL 2006 3 0107349.1, any other country patent certificate are in assessing.

Functions and features

+  35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board

    installed (mounting holes center distance 63 mm), users can choose any one by

    themselves.

+  Ten pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.

+  Standard configuration 6 digits display (999999kWh) by step motor type impulse register.

+  May select 7 digits display by impulse register (Product Configuration code is BJ).

+  There are a polarity port of pulse output passive closed and a nonpolarity port of pulse

    output passive distant, the output rate is 10 or 100 imp/kWh (can select). And contact with

    all kind of AMR system conveniently,Complying with standard IEC 62053-31 and DIN 43864.

+  Five LED instructions respectively every power supply state and signal of closed energy

    impulse and distant energy impulse.

+  Automatic detection the direction of the flow of load current. And instructions (signal of  

    closed energy impulse is green when working, that is meaning the direction of the flow of

    load current reverse).

+  Single direction three components measure three phase four wire active energy

    consumption. It is nothing with direction of the flow of load current. Complying with standard

    IEC 62053-21.

+  May select two components measure three phase three wire active energy (Product  

    Configuration code is DE) or two phase three wire active energy (Product Configuration code

    is DD)

+  Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect

    operation, we can also choose another type of wiring, and use 5+1 digits display by impulse

    register, CT (Product Configuration code is CF) and PT & CT (Product Configuration code is

    BF) for operation.

+  Standard configuration short terminals cover, may select extension terminals cover, in order

    to protect to use safety. (Product Configuration code is DI).

Technical parameters

Model	Accuracy	Reference Voltage(V)	Current specifications(A)	Starting current(A)	Insulation performance
DEM021DF	Class 1	3×127/220 3×230/400	5(30) 10(60) 20(100)	0.02 0.04 0.08	AC voltage 4kv for 1 minute, 1.2/50us  waveform impulse voltage 6kv

* If you need different reference voltage or current specification, please advisory our sales

  personnel.

Outer and mount dimension: 125 x88x68 mm

 

Wiring diagram (Type S)

Terminals	Note
L1	L1 phase line
L2	L2 phase line
L3	L3 phase line
N	Neutral line
7 and 8	Port of pulse output passive closed
15 and 16	Port of pulse output passive distant